Lithium-ion batteries from JMT, high-tech for your motorcycle.

Indicator (I)
All batteries are equipped with a battery status indicator.

Spacer (S)
All batteries are equipped with one or more spacers, which are glued under the battery with the supplied adhesive tape, so that the battery fits exactly into the battery box.

Waterproof (W)
The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.

Instant Condition Indicator
Simply press the test button. If all 3 blue LEDs light up, the battery is fully (ful) charged. If only 2 LEDs are lit, the battery is only half (med) charged. At the latest when only one LED is still lit (low), the battery must be charged.

With the replacement of a standard lead-acid battery, up to 5 kg of weight can be saved without any significant effort.

JMT Lithium-Ion batteries offer:

• approx. 1/3 of the weight of the comparable lead-acid battery
• unbeatable cost/weight saving ratio
• can be installed in any position, as it contains no acid
• contains no heavy metals
• balanced discharge/charge of all cells by balancer
• fast charge with high charge current possible (up to 90% in 6 min)
• very low self-discharge (max. 5% per month)
• even at high temperatures still good performance up to 60°C
• safe technology and long service life

Due to their specific characteristics, lead-acid batteries can only use 30% of their capacity, whereas lithium-ion batteries can use almost 100% of their capacity.

For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting power.

An even state of charge of all cells is also ensured by a built-in processor ("balancer").

With the help of adapters, the dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries.

The connections are also identical, which is why the battery can be replaced in a few minutes without any further adjustments.

Important Charging Advice
Please note that only suitable chargers may be used for charging. We recommend JMP chargers. For the maximum recommended charging currents, please refer to the technical data below

Under no circumstances should chargers be used which attempt to desulphate deeply discharged batteries below 10 volts with a voltage in excess of 14.9 volts before commencing the actual charge.

The maximum charging voltage of 14.9 volts must never be exceeded.

The manufacturer guarantees sufficient starting capacity down to -5 ° Celsius.

Technology
JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they cannot burst into flame or explode during normal operation.

The technology and manufacturing process ensure the highest safety standard for lithium batteries.

• 12 V maintenance-free lithium-ion battery
• charging current recommended 4 A
• maximum charging current for fast charging 28 A

The JT 51913-FP is comparable in dimensions and connections with Yuasa Manufacturer's no.:

• 51814
• 51913
• 52015
• YT19BL
• HG-18-12